F BALL - Styccobond F33



(Styccobond F33)

Product Details

Rapid set polyurethane adhesive for carpet gripper, nosings and trims, wooden skirtings, dado rails
0.35 litre cartridge

Select Quantity:

View Basket »

Calculate how much flooring you require

To cover this area of floor you will require:

0 packs


(Excluding VAT)

Each box 6.73 contains enough flooring to cover m² and we recommend you allow for 5% of wastage across the total floor area.

Complete the box below to calculate the number of packs you need to cover your floor:

Enter the total floor area in m²

Note: 1. The amount entered must be in square metres (m²) if the amount entered is in any other measurement then the number of boxes calculated will be a misrepresentation of what is actually required. 2. The total number of boxes will always be rounded up to the closest full box.

F BALL - Styccobond F33

STYCCOBOND F33 is a rapid set, high strength, single component moisture
curing polyurethane adhesive. It is non-flammable and is suitable for use over normal
underfloor heating installations.
STYCCOBOND F33 can be used for securing wood blocks, carpet grippers, aluminium
and PVC-U nosings, dado rails and wooden skirting.
STYCCOBOND F33 can be applied to STOPGAP smoothing underlayments, structurally
sound, smooth, dry subfloors of concrete and sand/cement screed and flooring grade
STOPGAP Waterproof Surface Membranes, sound flooring grade asphalt and other
non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate
STOPGAP smoothing underlayment.
Aluminium and PVC-U nosings should only be bonded to absorbent surfaces.

Copyright © 2009 yours4floors
website designed and maintained by Beaver Group