F BALL - Styccobond F40 (15 litres)



(Styccobond F40 (15 litres))

Product Details

Dual bond system (high tack release/permanent for carpets and underlays)
15 litres (also available in 5 litres)
Coverage = 4-9m² per litre

Select Quantity:

View Basket »

Calculate how much flooring you require

To cover this area of floor you will require:

0 packs


(Excluding VAT)

Each box 69.26 contains enough flooring to cover m² and we recommend you allow for 5% of wastage across the total floor area.

Complete the box below to calculate the number of packs you need to cover your floor:

Enter the total floor area in m²

Note: 1. The amount entered must be in square metres (m²) if the amount entered is in any other measurement then the number of boxes calculated will be a misrepresentation of what is actually required. 2. The total number of boxes will always be rounded up to the closest full box.

F BALL - Styccobond F40 (15 litres)

STYCCOBOND F40 is a solvent free synthetic polymer emulsion adhesive, developed
to provide a peelable bond for release underlays. It can also be used as a permanent
or release bond adhesive when fixing carpets. It is water based and dries to form a
transparent, permanently tacky coating.
The type of bond achieved is dependent on when the floorcovering is laid into the adhesive.
Laying the floorcovering into the adhesive once it has dried enables the underlay or
carpet to be lifted when required, without significant damage to either floorcovering
or subfloor. Laying the floorcovering into wet adhesive gives a permanent bond. It is
suitable for use over normal underfloor heating installations.
STYCCOBOND F40 can be used for securing a wide range of carpets which include
those with felt, secondary, unitary and many other backings. It is also suitable for fixing
certain release underlays which have been specifically developed for release bonding.

Copyright © 2009 yours4floors
website designed and maintained by Beaver Group