F BALL - Styccobond F41 (25 litres)

£101.10

£101.10

(Styccobond F41 (25 litres))

Product Details

Carpet tile tackifier with rubber inhibitor
25 litres (also available in 5 litres)

Select Quantity:

View Basket »

Calculate how much flooring you require

To cover this area of floor you will require:

0 packs

£0.00Total:

(Excluding VAT)

Each box 101.10 contains enough flooring to cover m² and we recommend you allow for 5% of wastage across the total floor area.

Complete the box below to calculate the number of packs you need to cover your floor:

Enter the total floor area in m²

Note: 1. The amount entered must be in square metres (m²) if the amount entered is in any other measurement then the number of boxes calculated will be a misrepresentation of what is actually required. 2. The total number of boxes will always be rounded up to the closest full box.

F BALL - Styccobond F41 (25 litres)

STYCCOBOND F41 is a solvent free acrylic polymer emulsion adhesive that contains
a rust inhibitor. It is designed to provide a permanently tacky film which prevents ‘looselay’
carpet tiles from moving under normal traffic but enables them to be lifted and
replaced easily when required. It is non-flammable, is protected against biodegradation,
is suitable for use over normal underfloor heating installations, is resistant to plasticiser
migration and will withstand normal wet cleaning techniques.
STYCCOBOND F41 can be used for securing a wide range of carpet tiles backed with
bitumen/felt, non-woven fabric, PVC and other polymer backings.
See the STYCCOBOND Recommended Adhesives Guide for details of specific
floorcoverings.
STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments,
structurally sound, smooth, dry subfloors of concrete and sand/cement screed,
plywood, flooring grade chipboard and hardboard.
STYCCOBOND F41 can also be applied to non-absorbent subfloors such as
STOPGAP Waterproof Surface Membranes, Raised Access Flooring Panels, Steel,
Terrazzo, Granolithic, Linoleum and Vinyl Floorcoverings.
Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the
appropriate STOPGAP smoothing underlayment.

Copyright © 2009 yours4floors
website designed and maintained by Beaver Group